Kitchen Splashback Installation Doncaster
Free Consultation
01302-490-277
Kitchen splashback installation in Doncaster is one of those jobs that looks simple from the outside and rarely is once you get into it. A splashback has to cope with heat, steam and daily wiping down, sit flush against worktops and units that are almost never perfectly square, and work cleanly around whatever sockets, extractor housings or switches happen to sit in its way. Get the templating wrong and you end up with visible gaps, uneven grout lines, or a panel that never quite sits flat against the wall behind it.
Premium Kitchens of Doncaster fits splashbacks in toughened glass, ceramic and porcelain tile, and stone or quartz cut to match an existing worktop, both as part of a full kitchen refit and as a standalone job on its own. Because the same crew also handles worktops, plumbing and electrics on a full kitchen job, a splashback that needs a socket temporarily isolated or an upstand cut from the same slab as your quartz worktop gets planned and fitted by people who already know the kitchen, rather than being handed off between separate trades.
What a Doncaster Splashback Fitting Actually Covers
- Measuring and templating the wall against your worktop line, wall corners and any out-of-true plasterwork common behind old tiles in older Doncaster properties
- Cutting glass, tile or stone panels to fit around sockets, switches, extractor housings and pipework
- Supply and fit of toughened glass, ceramic or porcelain tile, natural stone, or quartz splashbacks matched to worktops we've supplied
- Stripping out and disposing of old tiles, adhesive residue or a previous splashback panel under our own registered waste carrier licence
- Sealing every edge and joint against water getting in behind the hob and sink - one of the more common faults we find left by other fitters
- Protecting worktops, flooring and cabinet doors while cutting and fitting is underway
- Coordinating with our own Part P approved electrician where sockets need isolating, moving back, or refitting flush around the new panel
- Care and cleaning guidance specific to whatever material you've chosen
Not Included / Costed Separately
- Rewiring, moving a socket to a new position, or adding a new circuit - priced and carried out separately by our Part P electrician, not bundled into the splashback price
- Disconnecting or refitting a gas hob or range cooker - only ever handled by a Gas Safe registered engineer, quoted as its own line
- Making good damaged plaster or render behind old tiles once they've been stripped off - checked on site and quoted as an addition rather than assumed sound
- Full wall tiling beyond the splashback zone, such as floor-to-ceiling tiling of a whole kitchen wall
- Bespoke printed or image glass panels - we can source these, but they need a longer lead time from the glass supplier and a separate quote
- Widening a gap to fit a wider hob or range cooker - that's a kitchen alteration in its own right, scoped and priced separately
How We Take a Splashback Job From First Call to Finished Wall
- Free consultation -- Call or message us with a rough idea of your kitchen size and the material you're leaning towards. We'd rather book a site visit than quote blind, because wall condition and socket layout change the job more than most people expect.
- Measuring and templating -- We check the worktop line, how square the wall actually is, and exactly where sockets and switches need cutting around. Older properties around central Doncaster and the surrounding towns often need this done more carefully, since walls behind decades-old tiling are rarely as flat as they look once the tiles come off.
- Material choice and written quote -- You choose glass colour, tile pattern, or a stone/quartz match to your worktop, and we confirm supplier lead times - glass and stone panels are cut to your specific template rather than sold off the shelf, so they're not instant. You get a written quote before anything is ordered or cut.
- Fitting day -- The old splashback or tiles come out, the new panel is cut and dry-fitted, socket faceplates are removed and refitted flush around it, and every edge is sealed. A single straight run behind a hob is usually a day's work; a full-height panel behind a range cooker or an L-shaped run around a corner kitchen takes longer.
- Final check and handover -- We test the sockets we've worked around, check the seal is properly watertight along the worktop line, and leave you with care instructions matched to the material fitted - glass, tile and natural stone are all looked after slightly differently.
What a Splashback Costs to Fit in Doncaster
Splashback pricing comes down to material and area more than anything else. As a rough guide for UK installations in 2026, glass splashbacks typically run £48-£120 per square metre installed, acrylic panels £120-£220 per square metre, and tiled splashbacks around £20-£100 per square metre for materials plus £50-£150 for fitting labour. Labour on its own for a straightforward job usually adds somewhere between £150 and £400 depending on how much cutting around sockets and awkward angles is involved. A stone or quartz splashback cut to match a worktop is priced against that worktop order rather than as a separate square-metre rate, since it comes off the same slab.
Those figures are a starting point, not a quote. Wall condition, how many sockets need cutting around, whether old tiles need stripping first, and whether you want a panel taken to ceiling height behind a range cooker all move the final number. A proper price only comes after we've seen the wall and worktop in person, which is what the free consultation is for.
Comparing Splashback Materials for a Doncaster Kitchen
| Material | Typical cost per m² (fitted) | Heat resistance | Day-to-day upkeep | Best suited to |
|---|---|---|---|---|
| Ceramic/porcelain tile | £70-£150 (£20-£100 materials plus £50-£150 fitting) | Good - porcelain is the better pick directly behind a hob | Grout lines need the odd clean and occasional resealing | Most kitchens, period and modern alike |
| Toughened glass | £48-£120 | High - suited to sitting close to hob heat | Wipe-clean, no grout to maintain | Modern kitchens, bold colour panels, printed designs |
| Acrylic | £120-£220 | Moderate - keep clear of direct hob heat | Wipe-clean but can scuff or scratch over years of use | Budget-conscious modern kitchens away from the hob |
| Stone or quartz matched to worktop | Priced against your worktop order, not a standalone rate | Very high | Natural stone needs occasional resealing; quartz needs little upkeep | Kitchens with stone or quartz worktops wanting a seamless, joint-free look |
One Crew Covers the Wall, Not Just the Panel
Splashback jobs tend to expose whatever the old tiles were hiding - damp or crumbling plaster underneath, a socket sitting exactly where the new panel needs to sit, corners that were never actually square to begin with. That's where it helps that we're not a splashback specialist working on their own: our master plasterer can put a stripped-out wall right there and then, on the same visit, instead of you having to find and book a second tradesman before we can carry on. If a socket needs isolating or refitting flush around the panel, our own Part P approved electrician does it as part of the job rather than us working around someone else's diary.
That's the same crew that's been designing, supplying and fitting kitchens across Doncaster and South Yorkshire for over 20 years, so a splashback fitted on its own gets the same attention to what's happening behind the tiles as one fitted mid-refit. Old material comes off site under our own registered waste carrier licence, and the finished panel carries a 5-year labour and installation guarantee plus a 2-year product guarantee, backed by CITB and FSB membership. Most of the splashback repairs we get called out to trace back to a rushed edge seal or a panel fitted onto a wall nobody checked first - which is exactly why we check the wall before we cut anything, not just measure it.
Where We Fit Splashbacks Around Doncaster
We're based out of Rotherham and work across Doncaster as our main patch, from the city centre out to Bessacarr, Wheatley, Wheatley Hills and Balby. Central Doncaster and Bentley have a lot of older terraced housing where walls behind original tiling are rarely square, which is exactly the sort of job where careful templating earns its keep. Newer estates around Rossington, Woodfield Plantation and Kirk Sandall tend to have straighter, better-prepared walls, which usually means a faster fit. Out towards Sprotbrough, Tickhill, Bawtry, Auckley and Finningley we see more converted farmhouses and larger detached kitchens, often with a range cooker or Aga that needs heat-rated glass taken higher up the wall than the standard 600mm.
We also cover Cantley, Armthorpe, Conisbrough, Mexborough, Adwick le Street, Carcroft, Dunscroft, Dunsville, Askern, Stainforth, Thorne, Branton, Blaxton, Hatfield and Warmsworth, plus Doncaster City Centre itself. Beyond Doncaster we take on splashback and kitchen work across Rotherham, Sheffield, Barnsley, Wakefield, Leeds, York and Hull, and further south into Nottingham, Nottinghamshire, Derby and Derbyshire.
Got Questions?
Frequently Asked Questions
How much does a kitchen splashback cost to install in Doncaster?
It depends mostly on material and area. Glass typically runs £48-£120 per square metre fitted, tile around £20-£100 per square metre for materials plus £50-£150 fitting, and acrylic £120-£220 per square metre. Stone or quartz to match a worktop is priced against that worktop order. A firm number needs a look at your wall and worktop first, which is what the free consultation covers.
Is glass or tile better for a kitchen splashback?
Neither is objectively better - they suit different kitchens. Glass gives you a joint-free, wipe-clean surface and lets you match paint colours exactly, which suits a modern kitchen. Tile is more forgiving of an imperfect wall underneath, easier to patch or replace a section of if it's ever damaged, and usually the cheaper option for a straightforward job. If you're behind a range cooker, toughened glass rated for sustained heat is generally the safer choice.
How long does splashback installation take?
A single straight run behind a hob is usually a day's work once templating is done. A full-height panel behind a range cooker, an L-shaped run around a corner kitchen, or a job where old tiles need stripping and the plaster underneath needs making good first will take longer - we'll give you a realistic timeframe once we've seen the wall.
Can a splashback be fitted around a hob and sockets easily?
Yes, that's a normal part of the job rather than an extra. We template precisely around socket positions, extractor housings and switches, and coordinate with our own electrician to isolate and refit faceplates flush around the new panel. What isn't straightforward is doing it well without proper templating tools, which is a common reason DIY splashback fits end up with gaps or crooked cuts around sockets.
Can a splashback be toughened enough to withstand heat from a range cooker in a larger kitchen?
Yes. Toughened glass is rated to handle sustained heat close to a hob or range far better than standard tile adhesive and grout, and for a range cooker we'll usually recommend taking the panel higher up the wall than the standard 600mm splashback height. It's priced and specified individually rather than at a flat rate, since range setups vary a lot in width and heat output.
Do you offer printed or bespoke image glass splashbacks?
We can source printed and custom-coloured glass panels, but they're not a stock item - they go through the glass supplier on a longer lead time than a plain toughened panel, and get their own written quote once the design and size are confirmed. Worth factoring into your timeline if you're working towards a particular date.
Can old tile splashbacks be safely removed and reused elsewhere in a Doncaster home rather than binned?
Honestly, rarely. Tiles bedded in adhesive and grout almost always crack or chip when they're prised off, so we don't promise reuse as standard - we'd rather tell you that up front than have you expect tiles back that don't survive removal. Occasionally a tile fixed with a removable adhesive comes off cleanly enough to reuse in a low-visibility spot, but we look at that case by case rather than guarantee it.
Do you offer a same-week splashback swap service for landlords between tenants?
We don't run a fixed same-week guarantee as a standalone service, because glass and stone panels are cut to template and depend on supplier lead times we don't control. Where a tile or acrylic splashback fits the turnaround and the material's in stock with our suppliers, we'll do what we can to prioritise it - it's worth calling as soon as a changeover date is confirmed so we can tell you honestly whether it's achievable rather than promise something we might not hit.
Book Your Splashback Before the Wall Behind It Gets Worse
Old grout and tile joints let water through eventually, and the longer a failing splashback sits there, the more likely you are to find damp plaster or a swollen worktop edge once it comes off - catching it early usually means a straightforward swap rather than a bigger repair job. Get in touch for a free consultation, and we'll come out, measure the wall properly, and give you a written quote for glass, tile or a stone match before anything's ordered.
Premium Kitchens of Doncaster
Call 01302-490-277
Get in Touch
Premium Kitchens of Doncaster
📞 01302-490-277
✉️ info@kitchensindoncaster.co.uk
Glass • Old tiles and • Free Quotes
Quick Free Estimate - No Obligation
Fully Insured • Response within 15 mins
🔒 Your details are safe with us. No spam, ever.